QMTS Industry Training Logo
cswip
TWI Training Representative

CSWIP 3.2.2

Senior Welding Inspector

Re-sit Exam

Enrol now
Read More
Overview

Re-sit Exam

Duration

1 day

Fees

$1600

Location

On site

Certification

CSWIP

Exam Calendar

CSWIP 3.2.2

Senior Welding Inspector

Re-sit Exam

If you are unsuccessful in part or all of your initial CSWIP exams, you may re-sit the failed parts at another time in accordance with the following:

  1. You will have 12 months from the date of your initial exam to re-sit the failed part/s, after this time you must repeat the entire examination.
  2. The re-sit exam may not be taken within 30 days of your previous exam, unless additional approved training is undertaken before the re-sit.
  3. If you are unsuccessful in the re-sit exam, you will be required to take the approved course in full again, followed by the full exam (if taken within 6 months of the initial course, you will receive a 50% discount on the course only).

You can choose to re-sit the failed parts of your exam by enrolling on a date reserved for HALF DAY Exams on the course calendar.

QMTS offers a Practical Tuition session in order to refresh your knowledge prior to your exam re-sit. These sessions take place on the Monday of the same week of your re-sit exam, which will take place on a Thursday. Both the training and exam will take place on site at QMTS. The training session runs for 6 hours and costs $440.

Exam Format

The CSWIP 3.2.2 Senior Welding Inspector exam consists of the following parts:
  • Part A3 General Theory
    30 Questions
    Required Pass Mark: 70%
    Duration: 45 mins

 

  • Part B1 Theory NDT
    40 Questions
    Required Pass Mark: 70%
    Duration: 75 mins

 

  • Part C3 Symbols
    10 Questions
    Required Pass Mark: 70%
    Duration: 30 mins

 

  • Part D3 Radiographic Interpretation Theory
    20 Questions
    Required Pass Mark: 70%
    Duration: 30 mins

 

  • Part D3 Radiographic Interpretation Practical
    (Open book – TWI Specification)
    50 Questions
    Required Pass Mark: 70%
    Duration: 100 mins

 

The candidate will be provided with an iPad and specifications booklet. No physical film interpretation is required – all content is digital.

Enrol now
FAQs

Need a refresher?

QMTS offers a Practical Training session which takes place prior to your scheduled exam. Both the practical training and exam will take place on site at QMTS.

Practical Training
When: Monday prior to your scheduled exam
Location: On site at QMTS Industry Training
Duration: 6 hours
Cost: $440

FAQs
Contact us

How to Enrol

Please Note

Enrolment documentation must be sent by email to training@qmts.net.au and payment of the full fee must be received no later than 3 WEEKS prior to the course start date.

You will receive an invoice for the course fee/s once we receive your correctly completed Enrolment Form and signed Terms and Conditions.

If you have any questions about the course or enrolment process, please refer to our FAQ.

FAQs
Contact us
CSWIP 3.2.2

Enrolment Checklist

Download Enrolment Pack
FAQ

Frequently Asked Questions

We offer different options depending on which exams you are completing:

  1. Practical Training
    When: This sessions takes place on Monday of the same week of your scheduled exam, which takes place on Thursday. Both the practical training and exam will take place on site at QMTS. 
    Duration: 6 hours
    Cost: $440

  2. E-Learning Refresher
    When: This option is completed online, prior to your scheduled exam (valid for 60 days).
    Cost: $550
View Exam Calendar
The exam fee is $1600

You are eligible to sit a CSWIP Renewal Exam if you currently hold the relevant CSWIP Welding Inspector Certificate.

Before enrolling with QMTS for your renewal exam, please complete the CSWIP online Renewal Application Request to obtain a letter of approval. If you require an extension, please contact TWI online or email TWI directly at personnel@twicertification.com to arrange an extension certificate.

Once you have received a letter of approval and/or your extension certificate, you can proceed with your QMTS enrolment.

Enrolment documents must be lodged and payment must be received 21 days prior to the course start date. Please ensure all the documents specified in the enrolment pack are completed and returned by email to training@qmts.net.au prior to this deadline, 21 days before the start of the course and/or exam.

Your place on the course or exam will be confirmed when payment is received. If all the places on your preferred course are filled prior to receiving payment, you will need to enrol in the next available course and/or exam.

Candidates can find their provisional results on the TWI Training website

To access your results you will need the following details:
• Customer Number
• Exam Date
• Your date of birth

Your customer number will be emailed to you in a Post Exam Email from QMTS Industry Training.
If you require a Re-sit, please send your results to training@qmts.net.au

If you are unsuccessful in part or all of your initial CSWIP exams, you may re-sit the failed parts at another time in accordance with the following:

  1. You will have 12 months from the date of your initial exam to re-sit the failed part/s, after this time you must repeat the entire examination.
  2. The re-sit exam may not be taken within 30 days of your previous exam, unless additional approved training is undertaken before the re-sit.
  3. If you are unsuccessful in the re-sit exam, you will be required to take the approved course in full again, followed by the full exam (if taken within 6 months of the initial course, you will receive a 50% discount on the course only).

You can choose to re-sit the failed parts of your exam by enrolling on a date reserved for HALF DAY Exams on the course calendar.

QMTS offers a Practical Tuition session in order to refresh your knowledge prior to your exam re-sit. These sessions take place on the Monday of the same week of your re-sit exam, which will take place on a Thursday. Both the training and exam will take place on site at QMTS. The training session runs for 6 hours and costs $440.

You can find a guide to completing your TWI Enrolment Form in the course enrolment pack, or download it here

Your Record of Vision Test can be taken to Specsavers or an Optometrist who can complete the test. 

QMTS offers bridging courses to convert your current Welding Inspector qualifications to the equivalent CSWIP qualifications by undertaking the corresponding courses and exams listed. You will also be eligible to receive 50% discount off the full course fee when you enrol to complete the bridging course and exam.*

American Welding Society

Current: AWS Certified Welding Inspector
Equivalent: CSWIP 3.1 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.1 Course and Exam
Prerequisite: Your AWS certification must be a current.

Welding Technology Institute of Australia

Current: WTIA Certified Welding Inspector
Equivalent: CSWIP 3.1 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.1 Course and Exam
Prerequisite: Your WTIA certification must be a current.

South African Institute of Welding Level 1

Current: SAIW Welding/Fabricator Inspector Level 1
Equivalent: CSWIP 3.1 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.1 Course and Exam
Prerequisite: Your SAIW certification must be a current.

South African Institute of Welding Level 2

Current: SAIW Welding/Fabricator Inspector Level 2
Equivalent: CSWIP 3.2.1 Senior Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.2.1 Course and Exam
Prerequisite: Your SAIW certification must be a current.

VT-W2 (Dutch)

Current: CWV2 Welding Inspector
Equivalent: CSWIP 3.1 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.1 Course and Exam
Prerequisite: Your CWV2 certification must be a current.

Canadian Welding Bureau Level 1

Current: CWB Welding Inspector Level 1
Equivalent: CSWIP 3.0 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.0 Course and Exam
Prerequisite: Your CWB Level 1 certification must be a current.

Canadian Welding Bureau Level 2

Current: CWB Welding Inspector Level 2
Equivalent: CSWIP 3.1 Welding Inspector
Bridge your qualification by successfully completing the CSWIP 3.1 Course and Exam
Prerequisite: Your CWB Level 2 certification must be a current.

* A 50% discount will be applied to your course fee upon enrolment in the bridging course and exam of your choice. The discount applies to the course fee only and does not include the exam fee.

We run our Industry Training courses from the QMTS Head Office at 1/969 Abernethy Road, High Wycombe WA

You can find a map & more details are on our Contact page.