5 Days
Course & Exam $3990
On site
CSWIP
The CSWIP Welding Inspector course is designed for inspection engineers and supervisory staff. In preparation for this course you will have access to TWI’s online CSWIP Welding Inspector Pre-Learning package.
If you have little or no previous welding experience you’re advised to attend the Certificate in Visual Inspection of Welds course prior to this course.
This course will teach you the duties and responsibilities of a welding inspector including fusion welding processes, typical weld defects, types of steel (including carbon-manganese, low alloy, and stainless steels), the hardening of steels, weldability, heat treatment, and parent metal defects. The programme also includes visual inspection, the testing of parent metals and welds, and destructive and non-destructive test techniques.
You will learn welder and procedure approval, codes and standards, and an outline of safe working practices. There will be an opportunity to practice examination questions while undergoing continuous and end-of-course assessment. If you meet the CSWIP requirements, you will be eligible to complete the relevant CSWIP examination after the 4 day course.
Prior to attending the CSWIP Welding Inspection course there is an online learning component that will provide you with an essential foundation. It will refresh your knowledge and also allow you to identify any areas of weakness or uncertainty that can be discussed with the lecturer during the full course delivery.
This is an effective supplementary resource and revision tool which supports the classroom based learning materials and course content. It provides a comprehensive blended learning experience that can assist with various types of learning styles.
To access TWI’s online CSWIP Welding Inspector Pre-Learning package please send an email to training@qmts.net.au to request the relevant documents and information.
In order to run the Welding Inspector Pre-course package your computer will need the following basic capabilities:
Operating System Windows Vista 7, 8, 10 or 11
Internet connection 2Mbps minimum
Browser Internet Explorer 11 or higher (PC)
Plugin Silverlight (Download Silverlight)
Enrolment on this course does not constitute reservation of an examination. All candidates must attend a CSWIP approved course of training prior to sitting for the exam. All courses may be followed by a CSWIP Welding Inspector examination for candidates with appropriate experience, as specified in the CSWIP scheme document WI-6-92.
To enrol in this course you have experience in at least one of the following roles for the specified time period. Your experience must be verified by your current /or previous employer.
In addition, candidates must comply with Clause 1.3.4 of CSWIP Scheme Document WI-6-92 which states that All candidates (with the exception of ‘mature candidates,’ see section 1.4) must attend a CSWIP approved course of training at the appropriate level prior to examination.
Enrolment documentation must be sent by email to training@qmts.net.au and payment of the full fee must be received no later than 3 WEEKS prior to the course start date.
You will receive an invoice for the course fee/s once we receive your correctly completed Enrolment Form and signed Terms and Conditions.
If you have any questions about the course or enrolment process, please refer to our FAQ.
We run our Industry Training courses from the QMTS Head Office at 1/969 Abernethy Road, High Wycombe WA
You can find a map & more details are on our Contact page.
Although there is no specific experience required for this course, it is recommended that candidates possess a minimum of six months’ welding-related engineering experience and two years’ industrial experience.
Candidates must also comply with Clause 1.3.4 of CSWIP Scheme Document WI-6-92 which states that All candidates (with the exception of ‘mature candidates,’ see section 1.4) must attend a CSWIP approved course of training at the appropriate level prior to examination.
Enrolment documents must be lodged and payment must be received 10 days prior to the course start date. Please ensure all the documents specified in the enrolment pack are completed and returned by email to training@qmts.net.au prior to this deadline, 10 days before the start of the course and/or exam.
Your place on the course or exam will be confirmed when payment is received. If all the places on your preferred course are filled prior to receiving payment, you will need to enrol in the next available course and/or exam.
The total exam time is 5 hours (300 mins). There are 3 parts to the exam:
Theory Part 1 – Duration: 120 mins
Content: Welding Inspection
80 Questions
Required pass mark: 70%
Theory Part 2 – Duration: 90 mins
Content: WPS/WPQR
40 Questions
Required pass mark: 70%
Practical Part 1 – Duration: 90 mins
Content: Exam Specimens
24 Questions
Required pass mark: 70%
If you are unsuccessful in part or all of your initial CSWIP exams, you may re-sit the failed parts at another time in accordance with the following:
You can choose to re-sit the failed parts of your exam by enrolling on a date reserved for HALF DAY Exams on the course calendar.
QMTS offers a Practical Tuition session in order to refresh your knowledge prior to your exam re-sit. These sessions take place on the Monday of the same week of your re-sit exam, which will take place on a Thursday. Both the training and exam will take place on site at QMTS. The training session runs for 6 hours and costs $440.
Yes! You can download a brochure for CSWIP here
You can find a guide to completing your CSWIP 3.1 Enrolment Form in the course enrolment pack, or download it here
To enrol in this course you must have experience in at least one of the following roles for the specified time period. Your experience must be verified by your current or previous employer.
In addition, all candidates must comply with Clause 1.3.4 of CSWIP Scheme Document WI-6-92 which states that All candidates (with the exception of ‘mature candidates,’ see section 1.4) must attend a CSWIP approved course of training at the appropriate level prior to examination.
Candidates can find their provisional results on the TWI Training website
To access your results you will need the following details:
• Customer Number
• Exam Date
• Your date of birth
Your customer number will be emailed to you in a Post Exam Email from QMTS Industry Training.
If you require a Re-sit, please send your results to training@qmts.net.au
Your Record of Vision Test can be taken to Specsavers or an Optometrist who can complete the test.
We offer different options depending on which exams you are completing: